Installation case study · Wilmslow, Cheshire
Smart Lock Installation on an Older Timber Door in Wilmslow
An older timber entrance door in Wilmslow, Cheshire needed more than a straight swap to take a new smart lock. This installation combined a black TTLock-compatible lock with a Wi-Fi gateway, following an assessment and modifications agreed with the homeowner.
Request a Free Installation QuoteThe compatibility challenge
The door had an older, traditional key-operated locking arrangement. Its existing preparation was not directly compatible with the replacement smart lock, so the work could not be treated as a straightforward exchange of one lock for another.
Assessing that compatibility was an important part of the job. The necessary modifications were explained to the homeowner, and approval was obtained before proceeding. This meant the customer understood why adaptations were needed before work continued.
Agreed adaptations and careful fitting
The timber door and its existing lock preparation were carefully adapted to accommodate the black TTLock-compatible smart lock. The focus was on working with the existing door and completing the agreed changes carefully, rather than assuming that an older locking arrangement would accept the new hardware without modification.
Work ran from 7:05 PM to 9:30 PM, a total of 2 hours 25 minutes. That duration reflects this particular door and the adaptations it required. A straightforward compatible installation may take approximately 30–60 minutes; times vary with the door, hardware and compatibility. The shorter estimate should not be treated as a promise for every existing door.
The installation in pictures
Choose a photograph to enlarge it. Videos play only when selected.
Before
Before
Silent footage. The camera moves from the traditional handle and keyhole to the original locking hardware at the edge of the timber door.
During
Silent footage. A close view shows a drill working at the open door’s existing lock recess. The clip finishes with the prepared door edge in view.
Testing and customer handover
The installation was completed successfully, tested and demonstrated. The homeowner was shown how to control the lock through the TTLock app and how to unlock it remotely through the Wi-Fi gateway.
The handover covered the installed system, so the customer could see the app control and remote unlocking demonstrated as part of the completed work.
The result
The homeowner was very pleased with the result. This Wilmslow job shows why the starting point for an older timber door is its existing hardware and preparation: assess compatibility, explain the necessary changes, obtain agreement, and finish with testing and a customer demonstration.